The hamburger patty making machine can make many kinds of products such as chicken nuggets, chicken cutlets, meat steaks, vegetable cakes, potato cakes, etc. It has a large production output, a wide variety of products with simple operation. Therefore, it is welcomed by many customers. The following is an introduction to the things you should pay attention to when using the hamburger patty making machine.
Suitable raw materials and finished products
The hamburger patty making machine is suitable for all kinds of meat, aquatic products and vegetables, and other raw materials. Such as chicken, lamb, pork, fish, shrimp, and other meat; potatoes, pumpkin, carrots, and other vegetables. It can make chicken nuggets, hamburger patties, potato cakes, pumpkin pie, and other products in fast-food restaurants, as well as various meat skewers for barbecue. No matter what shape you want to make, as long as you provide us with the shape and size of the mold, we can customize it for you.
Precautions before starting the hamburger patty making machine
After receiving the patty maker, you should first check the wire to see if the mechanical part of the machine is loose. Check whether the tightness of the mesh belt is appropriate; whether the protective cover is installed in place; whether the material box is properly covered. Insert the plug of the power cord into the socket and make sure it is connected to three-phase power. Press the start button to start the device. After turning on the hamburger patty making machine, it will automatically count. Press the clear key to clear the previous data. After connecting to the power supply, you can pour into the materials for trial operation.
How to adjust the patty making machine mold?
If you have purchased multiple molds, you need to remove them when replacing the molds and install and adjust the new molds.
Steps to exchange molds:
1. Loosen the screws of the protective cover next to the mold and remove the protective cover
2. Loosen the compression nut and remove the paper feed wheel
3. Pull out the mold from the mold shaft to take out the mold
4. Reinstall the new mold in the same way as the old mold is removed
Adjust the mold
After installing the new mold, the mold needs to be adjusted to adjust the thickness of the molded product. As shown in the figure, it can be adjusted by adjusting the tightening of the screw above the molded rod. The lower the screw, the closer the mold is to the barrel, so the thickness of the product produced is smaller.
How to clean the hamburger patty making machine
The hamburger patty machine’s hoppers, molds, mold shells, conveyor belts, shells, protective covers, and other parts can be cleaned. When cleaning the hopper, you can first use a shovel to clean the remaining materials in the hopper. Then, use hot water for washing. For the mold, the mold can be disassembled first and then scrubbed with clean water. For other parts exposed to the outside, you can use a rag to wipe.
